Walfront 2 Pozisyon 5 Yollu Hava Kontrol Solenoid Valfı Pnömatik Geri Vites Anahtarı Kontrol Vanaları G1 / 4in Emme G1 /

Karakterislikler

Item Type:

Solenoid Valve

Product Material:

Aluminum alloy + stainless steel + copper

Product Model:

4V210-08 boutique model

Coil Aperture:

Approx. 2mm / 0.08in

Working Medium:

Air

Port Size:

Intake, Outlet

Effective Cross Sectional Area:

16.0mm²

Position Number:

5 Way 2 Position

Pressure Range:

0.15-0.8MPa

Working Temperature:

-20-70℃

Maximum Working Frequency:

5 times/sec

Power Consumption:

4.5VA

Waterproof Rating:

IP65

Application:

  food processing industry, robotics industry, chemical plant application industry, textile industry, automation workshop

Package List:

1 x Solenoid Valve:

Note:

1. When installing the solenoid valve, note that the arrow on the valve body should be consistent with the flow direction of the medium. Do not install in a place where there is direct dripping or splashing water. The solenoid valve should be installed vertically upwards.:

2. The solenoid valve should be guaranteed to work normally within the 15%‑10% fluctuation range of the power supply voltage of the rated voltage.:

3. After the solenoid valve is installed, there must be no reverse pressure difference in the pipeline. It needs to be energized several times to make it suitable for temperature before it can be put into use formally.:

4. The pipeline should be thoroughly cleaned before installation of the solenoid valve. The medium should be free of impurities. Install a filter before the valve.:

5. When the solenoid valve fails or is cleaned, a bypass device should be installed to ensure the system continues to run.: